Brother DCP-375CW Guía de usuario descargar pdf (Pagina 82)

Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW,

DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)

Configuration in Infrastructure mode 5

Before configuring the wireless settings 5

IMPORTANT

• If you have previously configured the wireless settings of the machine, you must reset the network LAN

settings before you can configure the wireless settings again.

(For DCP-373CW, DCP-375CW, DCP-377CW, MFC-253CW, MFC-255CW and MFC-257CW)

Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.

Press 1 or a to reset and then press 1 or a to accept the change. The machine will restart automatically.

(For DCP-593CW, DCP-595CW, DCP-597CW and MFC-495CW)

Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.

Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.

(For MFC-795CW)

Press MENU, a or b to display Network, press Network. Press Network Reset, and choose Yes to

reset and then press Yes for 2 seconds to confirm. The machine will restart automatically.

• Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using

more than one WEP KEY enter the KEY used for the first WEP KEY.

• You need to temporarily use an Ethernet cable (not included) during configuration.

• Before configuring your machine we recommend you write down the SSID and Password (if required) for

your wireless network. You will need this information before you continue with the configuration.

Item Record the current wireless network settings

Network name: (SSID/ESSID)

Password

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 169 170

Sin comentarios

Brother DCP-375CW Guía de usuario Pagina 82