Brother MFC-J5910DW Guía de usuario descargar pdf (Pagina 15)

Configuring your machine for a wireless network

Wireless configuration temporarily using a USB cable 3

It is recommended that you use a PC wirelessly connected to your network for this method.

You can remotely configure the machine from the computer on the network using a USB cable (A)

You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.

For Windows

users (Recommended) 3

IMPORTANT

• You need to temporarily use a USB cable during configuration (cable not included).

• If you are using Windows

XP, or currently using a computer connected to an access point/router by

network cable, you need to know the SSID and Network Key of your access point/router. Write them down

in the area below, as they are required when configuring the machine’s wireless settings.

a Turn on your computer.

b Start the Brother installer application.

1 Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.

If the model name screen appears, choose your machine. If the language screen appears, choose

your language.

2 The CD-ROM main menu will appear.

(MFC-J5910DW only) Click Initial Installation.

Note

• If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the

CD-ROM icon, and then double-click start.exe.

• The screen on your machine may vary depending on your region.

Item Record the current wireless network settings

SSID (Network Name):

Network Key

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 84 85

Sin comentarios

Brother MFC-J5910DW Guía de usuario Pagina 15