Brother Multi-Protocol Print Server Manual de usuario descargar pdf (Pagina 117)

TROUBLESHOOTING 11 - 6

If you are using a Berkeley-based UNIX, make sure that the

daemon is started on Berkeley based systems with the

command lpc start printer, where printer is the name of the local

print queue.

If you are using an AT&T-based UNIX, make sure the printer is

enabled (enable printer, where printer is the name of the local

print queue).

Make sure that the lpr/lpd remote line printer service are running

on the host computer (refer to your host computer

documentation for information on how to do this).

If you are having trouble printing more than one job at a time, try

increasing the IP timeout using the SET IP TIMEOUT

command or using BRAdmin.

If text or PCL jobs are run together, try setting the service

(remote printer) with EOT set to string number 2 (<ESC>E). For

example:

SET SERVICE BRN_xxxxxx_P1 EOT 2

If PostScript jobs fail to print or are run together, try setting the

service (remote printer) with EOT set to string number 3

(control-D). For example:

SET SERVICE BRN_xxxxxx_P1 EOT 3

If the lines of a text file are staggered, make sure that you have

specified a remote printer (rp) name of TEXT in your /etc/

printcap file.

If you are using Sun Solaris V2.4 or earlier, there is a bug which

causes long print jobs to fail when using a print server. If you are

having trouble printing long jobs (over 1MB), add the line mx#0

to your etc/printcap file entry.

If you cannot print from DEC TCP/IP Service for VMS (UCX),

make sure that you have version 2.0B or later of this software,

because earlier versions will not work with Brother print servers.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 133 134

Sin comentarios

Brother Multi-Protocol Print Server Manual de usuario Pagina 117