Brother Multi-Protocol Print Server Manual de usuario descargar pdf (Pagina 125)

APPENDIX A - 2

HTTP (Recommended)

Use your favorite web browser to connect to the Brother print server.

This will allow you to configure printer and/or print server parameters.

WebJetAdmin

Brother's print server range is HP WebJetAdmin compatible.

TELNET

To connect to the print server using TELNET on UNIX, Windows

4.0, or most other TCP/IP systems, type: TELNET ipaddress

at the command prompt of the system prompt, where ipaddress is

the IP address of the print server. When you are connected, press

RETURN or ENTER to get the "#" prompt, enter the password

access (the password will not appear on the screen), and type

anything in response to the Enter Username> prompt. When you

see the Local> prompt, you are ready to enter commands.

Enter HELP at the command prompt for a list of supported

commands.

BRCONFIG

The Brother BRCONFIG utility runs from the DOS system prompt

and is installed with BRAdmin. To connect the print server using the

Brother BRCONFIG NetWare utility, choose the BRCONFIG utility

from the Brother BRAdmin utilities menu. If you have only one print

server, you will be immediately connected to that server. If you have

more than one print server, you will be given a list of available print

servers. Type the number of the print server to which you wish to

connect. When you are connected, enter the password access (the

password will not appear on the screen) at the "#" prompt, and type

anything in response to the Enter Username> prompt. When you

get the Local> prompt, you are ready to enter commands. To use

BRCONFIG, a Novell Server (running the IPX protocol) is necessary

and an active connection must be made to the server.

Enter HELP at the command prompt for a list of supported

commands.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 133 134

Sin comentarios

Brother Multi-Protocol Print Server Manual de usuario Pagina 125