Brother DCP-340CW Guía de usuario descargar pdf (Pagina 19)

Configuring your machine for a network with an Ethernet cable connection

2 - 4

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the

device will appear as an APIPA device in the BRAdmin Professional utility screen.

• You can find the node name and Ethernet address (Node Address above) by printing out the Network

Configuration List. See Printing the Network Configuration List on page 4-27 for information on how to

print the Network Configuration List on your print server.

Double click the unconfigured device.

Enter the IP address, Subnet Mask and Gateway (if needed) of your print server.

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

Using the control panel to configure your machine for a network

You can configure your machine for a network using the control panel LAN menu. See Control panel setup

on page 4-1.

Using other methods to configure your machine for a network

You can configure your machine for a network using other methods. See Other ways to set the IP address

(for advanced users and administrators) on page A-1.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 177 178

Sin comentarios

Brother DCP-340CW Guía de usuario Pagina 19