Brother DCP-340CW Guía de usuario descargar pdf (Pagina 30)

Configuring your machine for a wireless network

3 - 9

If your wireless network is connected successfully, the display shows Connected for 2 seconds and

configuration is completed.

If the connection failed, the display shows Connection Error for 2 seconds. See Wireless network

troubleshooting on page 7-8.

(For MFC-820CW)

Press Menu.

Press ▲ or ▼ to select LAN.

Press OK.

Press ▲ or ▼ to select Setup WLAN.

Press OK.

Press ▲ or ▼ to select Setup Wizard.

Press OK.

The machine will search for a wireless network name (SSID) around the machine.

After a few seconds, you can select the SSID from the list using ▲ or ▼. Press OK to select the SSID.

If you select the SSID displayed, go to Step 11.

If you want to add a new SSID, go to Step 7.

Select <New SSID> using ▲ or ▼.

Press OK.

Enter the SSID. (For further information on entering text, see Entering Text (for MFC-640CW and

MFC-820CW) on page B-10.)

Press OK.

Using ▲ or ▼, select Infrastructure when instructed.

Press OK.

If you select Ad-hoc, go to Step 11.

Select the Authentication method using ▲ or ▼, and press OK.

If you select Open System, go to Step 11.

If you select Shared Key, go to Step 12.

If you select WPA-PSK, go to Step 13.

Connected

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 177 178

Sin comentarios

Brother DCP-340CW Guía de usuario Pagina 30